Home page - Products - UPS - Line-interactive UPS

APC Back-UPS 1600VA, 230V, AVR, IEC Sockets

Supplier Code: BX1600MI/HR
APC Back-UPS 1600VA, 230V, AVR, IEC Sockets
In stock
Main Input voltage
230 B

Rated power [W]
900 W

Rated power
1600 VA

Input Connection Type
IEC 60320 C13

output connection type
6 IEC 60320 C13

1,22 m

Number of cables

Battery Type
Lead-acid battery

Pre-installed batteries

Free battery compartments

Typical recharge time
8 h

Battery voltage
24 V

Battery capacity
7,0 Ah

battery life
3…5 year(s)

Comments on the battery schedule
The curve corresponds to the results of measurements of battery life. All measurements were carried out with new, fully charged batteries, in typical climatic conditions, without input voltage and with a resistive load at the output.

The possibility of increasing the autonomy time
is 0

The equipment is included
User Manual

The maximum value of the autonomy time
240 min

The number of unoccupied power modules
is 0

The number of slots occupied by power modules
is 0



19 cm

14 cm

39 cm

Net weight
10.3 kg

Type of fastener
No preference

Installation execution
Non - stable

two-support mount 0


Network frequency
50/60 Hz +/- 5 Hz auto detection

The limits of the input voltage
are 140...300 V

Vx.power factor at full load

Maximum set power (W)
900 W

Output frequency
50/60 Hz +/- 1 Hz synchronized with the power grid

Type of UPS
Linearly interactive

Type of voltage form
Stepwise approximation of a sine wave

Autonomy time at full load
00:01:00 900 Watts

Autonomy time at half load
00:06:30 450 Watts

Maximum set power (VA)
1600 VA

Switching time
The typical time is 6 ms, the maximum is 10 ms.


EN/IEC 62040-1:2019/A11:2021
EN/IEC 62040-2:2006/AC:2006
EN/IEC 62040-2:2018

Ambient operating temperature
0…40 °C

Relative humidity
0...95% without condensation

Altitude above sea level
0...3000 m

Ambient temperature during storage
-15…40 °C

Relative humidity of storage
0...95% without condensation

Storage height
0...3000 m

Acoustic level
40 dBA

Degree of protection IP

Alarm function
LED display with on-line indicators (mains operation)

Rating according to the level of absorbed energy
273 J

Main characteristics

Main Input Voltage 230 V
Main Output Voltage 230 V
Rated power in W 900 W
Rated power in VA 1600 VA
Product or component type Uninterruptible power supply (UPS)
Input Connection Type IEC 60320 C13
Output Connection Type 6 IEC 60320 C13
Cable length 1,2 m
Number of cables 1
Battery type Lead-acid battery
Provided equipment User manual

Batteries & Runtime

Number of battery filled slots 0
Number of battery free slots 0
Battery recharge time 8 h
Battery voltage 24 V
Battery capacity 7.0 Ah
Battery life 3...5 year(s)

General characteristics

Number of power module free slots 0
Number of power module filled slots 0
Redundant No

Physical characteristics

Height 19.00 cm
Width 14.00 cm
Depth 39.00 cm
net. Weight 10.30 kg
Mounting preference No preference
Mounting mode Not rack-mountable
USB compatible No


Network frequency 50/60 Hz +/- 5 Hz auto-sensing
Input voltage limits 140...300 V


Maximum configurable power in W 900 W
Maximum configurable power in VA 1600 VA
Output frequency 50/60 Hz +/- 1 Hz sync to mains
UPS type Line-Interactive
Wave type Stepped approximation to a sinewave
Transfer time 6 ms typical : 10 ms maximum


Product certifications CE, CB, EAC
Standards EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018


Ambient air temperature for operation 0..40 °C
Ambient air temperature for storage -15…40 °C
Relative humidity 0…95 %
Operating altitude 0...3000 m
Storage Relative Humidity 0…95 %
Storage altitude 0…3000 m
Acoustic level 40 dBA

Communications & Management

Сontrol panel LED Status display with on line : on battery

Surge Protection and Filtering

Surge energy rate 273 J

Product Dimensions

Width 230.0 mm
Height 290.0 mm
Depth 495.0 mm
Weight 11.6 kg