APC Back-UPS 1200VA, 230V, AVR, Schuko Sockets

Main features
- Working time with 650W load: 1m 1s
- Output power: 650 Watts / 1.2kVA
- Rated output voltage: 230V
- Rated input voltage: 230V
- Input connection type: Schuko
- Length of the cord: 1.2meters

Exit
- Maximum set power (W): 650 Watts / 1.2kVA
- Output frequency (synchronized with the power grid): 50/60 Hz +/- 1 Hz Synchronized with the power grid
- Topology: Linearly interactive
- Type of voltage form: Stepwise approximation of a sine wave
- Switching time: 6 ms typical : 10 ms maximum

Entrance
- Input frequency: 50/60Hz +/- 5 Hz Auto Detection
- Input voltage range during mains operation: 140–300V
- Number of power cables: 1
- Input power factor at full load: 0.54

Batteries and battery life
- Battery Type: Lead acid battery
- Typical recharge time: 8 hours
- Rated battery voltage: 12 V
- Expected battery life (years): 3 - 5
- Battery capacity in volt-ampere-hours: 108

Communication and administrative tools
- Interface Port(s): 36 Pin Battery Mgmt, USB
- Control panel: LED display with indicators on line (mains operation) : on battery (battery operation)
- Beep: Signal to switch to battery mode : a special signal of battery exhaustion

Surge protection and noise filtering
- Burst energy rating: 273joules
- Data Line Protection: Ethernet 10/100/1000 Base-T RJ45 protection

Physical parameters
- Maximum height: 190MM, 19.0cm
- Maximum width: 140MM, 14.0cm
- Maximum depth: 390MM, 39.0cm
- Net weight: 7.6KG
- Gross weight: 8.6KG
- Dimensions of the transport package: 297x235x495MM
- Color: Black

Environmental Parameters
- Operating temperature: 0 - 40 °C
- Operating range of relative humidity: 0 - 95 (Non-condensing)%
- Operating range of altitude above sea level: 0 - 3000 meters
- Storage temperature: -15 - 40 °C
- Relative humidity of storage: 0 - 95 (Non-condensing) %
- Storage height above sea level: 0 - 3000 meters
- Acoustic noise level at a distance of 1 m from the surface of the device: 40.0dB(A)
- Protection class: IP20

Accordance
- Compliance with the requirements of: CB, CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2